1. What marking is the road mark in the circle?

A. crosswalk line

B. slowdown and yield line

C. stopping and yield line

D. intersection signal line

Answer：A

2. How to pass through the unmanned level crossing without traffic lights?

A. properly reduce speed to pass

B. slide over in the neutral gear

C. stop to make sure it is safe, then pass

D. speed up and pass as fast as possible

Answer：C

3. When the vehicle has changed its direction due to a front tire blowout on the road, the driver should firmly hold the steering wheel with both hands to ensure the vehicle goes straight.

A. Right

B. Wrong

Answer：A

4. How to run when encountering this situation at the intersection?

A. stop and wait

B. obey the traffic lights

C. run straight on the right side

D. may turn right

Answer：A

5. It lights to indicate that ______

A. not buckled up

B. safety belt malfunction

C. the safety belts are too loose

D. buckled up already

Answer：A

6. Using the low beam light in such circumstances.

A. Right

B. Wrong

Answer：A

7. When driving at night on a road with no or poor lighting, the driver should switch from the low beam light to the high beam light. But the vehicle following in the same direction is not allowed to use the high beam light.

A. Right

B. Wrong

Answer：A

8. Driving across the double solid lines is _______

A. rule-breaking act

B. violation of law

C. faulty act

D. violation of regulations

Answer：B

9. It lights when turning on the rear fog light.

A. Right

B. Wrong

Answer：B

10. Whats the meaning of this sign?

A. embankment road

B. steep uphill road

C. continuous up slopes

D. steep downhill road

Answer：D

11. Whats the meaning of this sign?

A. T-shaped intersection

B. branching intersection

C. reduce speed to pass

D. dead-end road

Answer：D

12. Whats the meaning of this sign?

A. no entering the intersection

B. no right turn

C. no changing lane

D. no U turn

Answer：B

13. It lights to indicate that ______

A. charge current is too large

B. damaged battery

C. ammeter malfunction

D. charging circuit malfunction

Answer：D

14. Whats the role of the indicative marking?

A. No passing

B. indicate vehicles to pass

C. restrict from passing

D. warn and remind

Answer：B

15. How to do when the vehicle breaks down on road and needs to stop to solve the problem?

A. stop in the middle of the road

B. stop the vehicle where will not interfere the traffic

C. turn on the low beam lights or fog lights

D. stop on the spot to solve the problem

Answer：B

16. Whats the meaning of this sign?

A. a manned level crossing

B. multi-crossing of railway and road

C. grade separation level crossing

D. an unmanned level crossing

Answer：A

17. It lights to indicate that ______

A. the head and tail fog lights are turned on

B. front and rear width lights are turned on

C. the head lights are turned on

D. the hazard lights are turned on

Answer：B

18. When a vehicle merges with the traffic flow, the driver should turn on the turn signal in advance, go straight, observe the traffic conditions on both sides through the rear-view mirror, and merge with the traffic flow if it is safe to do so.

A. Right

B. Wrong

Answer：A

19. When a vehicle passes a tunnel, it is prohibited from overtaking.

A. Right

B. Wrong

Answer：A

20. What is the main role of the seat belt when there is a collision?

A. to protect the driver and passengers necks

B. to protect the driver and passengers chests

C. to reduce the injuries of the driver and passengers

D. to protect the driver and passengers waists

Answer：C

21. Whats the meaning of this sign?

A. reducing speed 40m ahead

B. minimum speed is 40km/hr

C. axle weight limit is 40 tons

D. maximum speed limit is 40km/hr

Answer：D

22. Whats the meaning of this guide arrow?

A. no passing

B. driving lane

C. merging

D. going straight

Answer：D

23. When a vehicle starts up, the driver should observe the traffic conditions and begin to start up after making sure it is safe to do so.

A. Right

B. Wrong

Answer：A

24. This sign reminds bump road ahead which may causes bump phenomenon.

A. Right

B. Wrong

Answer：A

25. If one drives an illegally assembled motorized vehicle, he should not only pay the fine, but also ________ .

A. be confiscated the driving license

B. be revoked the driving permission

C. be forced to recover the vehicle condition

D. be revoked the driving license

Answer：D