1. It lights to indicate that ______

A. not buckled up

B. safety belt malfunction

C. the safety belts are too loose

D. buckled up already

Answer：A

2. Whats the meaning of this guide arrow?

A. going straight and U turn are allowed ahead

B. left turn and U turn are allowed ahead

C. going straight and changing to left lane are allowed ahead

D. going straight and left turn are allowed ahead

Answer：B

3. When a vehicle coming in the opposite direction suddenly overtakes and occupies your lane, the correct way to deal with this situation is to __________.

A. Obstruct the way of that vehicle

B. Maintain the original speed

C. Reduce speed and avoid as much as possible, till stop

D. Speed up and go forward

Answer：C

4. Whats the meaning of this sign?

A. no left turn

B. dead-end road

C. no passing

D. bypass if overheight

Answer：D

5. When a vehicle stops temporarily in a rainy day, the driver should turn on ______.

A. The head and tail fog lights

B. The hazard lights

C. The high beam light

D. The reverse light

Answer：B

6. When the driver is suspected of drinking or drunk in a traffic accident, preserve the scene and immediately report to the police.

A. Right

B. Wrong

Answer：A

7. If a motorized vehicle driver allows his vehicle to be driven by a person whose driving license has been detained, the traffic police will serve an oral warning.

A. Right

B. Wrong

Answer：B

8. When a vehicle goes down a long slope, it should run at a lower gear and fully use the engine to brake.

A. Right

B. Wrong

Answer：A

9. Rear fog light lights when the light switch is at this position.

A. Right

B. Wrong

Answer：A

10. If one drives an illegally assembled motorized vehicle, he should not only pay the fine, but also ________ .

A. be temporarily detained the driving license

B. be revoked the driving license

C. be held for criminal liabilities

D. be detained for less than 10 days

Answer：B

11. Whats the meaning of this sign?

A. reduce speed in tunnel

B. turn on the high beam lights in tunnel

C. turn on the light in tunnel

D. width light in tunnel

Answer：C

12. As thick fog reduces visibility, turning on the high beam light can increase the visibility.

A. Right

B. Wrong

Answer：B

13. Whats the meaning of this sign?

A. provincial highway No.

B. national highway No.

C. county road No.

D. township road No.

Answer：C

14. After starting the engine, it lights to indicate that ______

A. fuel pump abnormal or malfunction

B. ignition system malfunction

C. fuel supply system is abnormal

D. fuel in tank reaches the minimum level

Answer：D

15. Which is correct when changing lane?

A. turn on the directional signal and turn left quickly

B. reduce speed properly when entering the left lane

C. cannot interfere other vehicles

D. speed up to enter the left lane

Answer：C

16. It lights when turning on the width light.

A. Right

B. Wrong

Answer：A

17. In which situation that a driver cannot drive?

A. after drinking coffee

B. after drinking milk

C. after drinking

D. after drinking tea

Answer：C

18. Whats the meaning of this sign?

A. Road traffic flow monitoring

B. Deceleration photographed area

C. Full section snapshot

D. Traffic monitoring equipment

Answer：D

19. Whats the meaning of this sign?

A. distance to a tourist area

B. category of a tourist area

C. direction of a tourist area

D. symbol of a tourist area

Answer：C

20. Full penalty points of a scoring cycle because of violating the traffic regulations is 12 points.

A. Right

B. Wrong

Answer：A

21. When passing a dangerous section of a mountain road, especially by the locations of frequent occurrence of landslides, mudslides, the driver should drive with care and avoid stopping.

A. Right

B. Wrong

Answer：A

22. This sign reminds embankment road ahead.

A. Right

B. Wrong

Answer：B

23. The validity of the driving license is divided into 6-year, 10-year and 20-year.

A. Right

B. Wrong

Answer：B

24. When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.

A. Right

B. Wrong

Answer：A

25. When crossing each other at night, how far should change the high beam lights to low beam lights?

A. not need to change lights

B. beyond 150m

C. within 100m

D. within 50m

Answer：B