张掖驾考英文版科目四

1. How to pass this intersection?

A. not reduce speed to pass

B. speed up to pass as soon as possible

C. slide over in the neutral gear

D. reduce speed or stop to observe

Answer:D

2. What kind of behavior of this driver violates the law?

A. not hold the steering wheel according to regulation

B. angle of the seat is not correct

C. not buckled up

D. the driving posture is incorrect

Answer:C

3. Whats the meaning of this guide arrow?

A. going straight and U turn are allowed ahead

B. left turn and U turn are allowed ahead

C. going straight and changing to left lane are allowed ahead

D. going straight and left turn are allowed ahead

Answer:B

4. When encountering school children crossing the road in a queue, the driver should ______.

A. Speed up in advance and pass forcefully

B. Stop to yield

C. Reduce speed and go slowly

D. Continuously honk to urge them

Answer:B

5. As the traffic flow at an interchange is generally one-way, the vehicles do not have to reduce speed when passing.

A. Right

B. Wrong

Answer:B

6. The seat belts can reduce the injury of the driver and passengers when there is a collision.

A. Right

B. Wrong

Answer:A

7. Whats the meaning of this sign?

A. water channel

B. bridge

C. tunnel

D. Culvert

Answer:C

8. When a vehicle reaches a sharp curve, the driver should _______.

A. Brake suddenly and go slowly

B. Drive along the outer side of the curve

C. Fully reduce speed and drive on the right side

D. Go forward by borrowing the opposite lane

Answer:C

9. When encountering stopping and waiting in turn or slow-moving vehicles in front, the motorized vehicle may _________.

A. borrow road to overtake

B. occupy the opposite lane

C. follow the vehicles in front

D. cut in the waiting vehicles

Answer:C

10. Whats the meaning of this sign?

A. watch for pedestrians

B. crosswalk

C. village or town

D. primary school

Answer:C

11. Whats the meaning of this sign?

A. crosswalk lights

B. watch for pedestrians

C. attention to traffic lights

D. intersection

Answer:C

12. How to use lights when changing to the left lane on road?

A. turn on the right-turn signal in advance

B. not need to turn on any turn signal

C. turn on the left-turn signal in advance

D. turn on the low beam lights in advance

Answer:C

13. You should speed up to go through the railway crossing in this case.

A. Right

B. Wrong

Answer:B

14. It lights to remind that engine oil needs to be filled.

A. Right

B. Wrong

Answer:B

15. A driver who drives an illegally assembled motorized vehicle is subject to ______ .

A. being held for criminal liabilities according to law

B. a fine of 200 yuan ~ 2,000 yuan

C. being revoked the vehicle license

D. being detained for less than 15 days

Answer:B

16. This sign indicates intersection ahead.

A. Right

B. Wrong

Answer:B

17. It lights when turning on the width light.

A. Right

B. Wrong

Answer:A

18. Whats the meaning of this sign?

A. no going straight and no changing to left lane

B. no going straight and no left turn

C. allowed to go straight and turn left

D. no going straight and no right turn

Answer:B

19. What is this manipulation device?

A. switch of windscreen wiper

B. switch of the head lights

C. switch of the turn signal

D. switch of defogger

Answer:A

20. It lights to indicate that the generator is charging to the batteries.

A. Right

B. Wrong

Answer:B

21. This sign indicates running slowly or stopping to let the vehicle on main road go first.

A. Right

B. Wrong

Answer:A

22. Whats the meaning of this sign?

A. no honking the tweeter

B. no honking the woofer

C. should honk

D. no honking

Answer:C

23. This set of the hand signals of the traffic police indicates that the vehicles should ____ .

A. turn right

B. change lane

C. reduce speed and pass slowly

D. pull over

Answer:C

24. Ignition switch in the ON position, the vehicle can not use electrical appliances.

A. Right

B. Wrong

Answer:B

25. When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.

A. Right

B. Wrong

Answer:A