1. It lights to indicate that ______

A. ABS system malfunction

B. handbrake is released

C. braking system malfunction

D. safety bags malfunction

Answer：A

2. When overtaking on a mountain road, the vehicle should overtake ______.

A. By taking every possible chance

B. By selecting a wide gentle uphill section

C. By selecting a fairly long downhill section

D. By selecting a relatively gentle downhill section

Answer：B

3. After starting the engine, it lights to indicate that ______

A. fuel pump abnormal or malfunction

B. ignition system malfunction

C. fuel supply system is abnormal

D. fuel in tank reaches the minimum level

Answer：D

4. What is the max speed on the expressway when the visibility is lower than 100 meters?

A. less than 40km/hr

B. less than 60km/hr

C. less than 80km/hr

D. less than 90km/hr

Answer：A

5. Whats the meaning of this mark on the road?

A. average speed is 100km/hr

B. minimum speed limit is 100km/hr

C. 100km/hr speed limit ban is lifted

D. maximum speed limit is 100km/hr

Answer：D

6. When a vehicle has to stop on an expressway due to a vehicle trouble, the driver should place a breakdown warning sign beyond ______ m behind the vehicle.

A. 25

B. 150

C. 100

D. 50

Answer：B

7. The motorized vehicle driver who lives outside the jurisdiction of the issuing vehicle management station may apply to the vehicle management station at the place where he is living, for license change.

A. Right

B. Wrong

Answer：A

8. May turn right in this situation.

A. Right

B. Wrong

Answer：B

9. If a motorized vehicle has reached the states mandatory write-off standard, its registration will not be handled.

A. Right

B. Wrong

Answer：A

10. Which part does it control when rotating this part of the switch?

A. the low beam lights

B. the head and tail fog lights

C. high beam lights

D. turn signals

Answer：B

11. The vehicles are prohibited from passing when encountering this traffic light at the intersection.

A. Right

B. Wrong

Answer：B

12. How to use lights in this weather condition?

A. use high beam lights

B. use fog lights

C. not use any light

D. turn on the right-turn signal

Answer：B

13. It lights continuously to indicate that engine control system failed.

A. Right

B. Wrong

Answer：A

14. When reaching a sharp curve, the driver should reduce speed and drive on the right side so as to avoid colliding with the vehicle crossing the central line of the curve in the opposite direction.

A. Right

B. Wrong

Answer：A

15. What is the max speed when passing this curve?

A. 40km/hr

B. 30km/hr

C. 50km/hr

D. 70km/hr

Answer：B

16. When a vehicle enters a two-way tunnel, the driver should turn on ________.

A. The hazard lights

B. The high beam light

C. The fog light

D. The width light or the low beam light

Answer：D

17. Whats the meaning of this sign?

A. max speed

B. speed limit

C. speed recommended

D. mini speed

Answer：C

18. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer：B

19. Whats the meaning of this sign?

A. no borrowing lane

B. no changing lane

C. no overtaking

D. no U turn

Answer：C

20. Whats the meaning of this sign?

A. expressway mileage No.

B. expressway border plate No.

C. expressway name No.

D. expressway section No.

Answer：C

21. Do not hang or place articles close to the front and rear windows that block the vision of the driver.

A. Right

B. Wrong

Answer：A

22. If a motorized vehicle driver causes a traffic accident and runs away but his conduct does not constitute a crime, he is subject to a 12-point penalty.

A. Right

B. Wrong

Answer：A

23. Whats the meaning of this sign?

A. emergency shelter

B. service area

C. pedestrian passage

D. crossing road facility

Answer：A

24. It lights to indicate that ______

A. not buckled up

B. safety belt malfunction

C. the safety belts are too loose

D. buckled up already

Answer：A

25. How to use lights when pulling over on road?

A. turn on the hazard lights

B. turn on the right-turn signal in advance

C. use the high and low beam lights alternately

D. not need to use any light to indicate

Answer：B