1. Speed up when passing the overflowing road.

A. Right

B. Wrong

Answer：B

2. When the road maintenance vehicle and the engineering vehicle are on duty, the passing vehicles should avoid with care.

A. Right

B. Wrong

Answer：A

3. When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer：C

4. How to pass when encountering this situation at the intersection?

A. make sure it is safe to pass

B. turn right and speed up to pass

C. speed up and pass straight

D. turn left and speed up to pass

Answer：A

5. Whats the meaning of this sign?

A. bypass at construction section

B. two-way traffic

C. bypass from left or right side

D. watch for danger

Answer：C

6. This sign reminds the road ahead goes through the village or town.

A. Right

B. Wrong

Answer：A

7. What marking is the white broken line on the road?

A. central line of opposite lanes which is prohibited from crossing

B. central line of opposite lanes which is restricted from crossing

C. central dividing line of the one-way road lanes

D. central line of same direction lanes which is allowed to cross

Answer：D

8. It lights when turning on the front low beam lights.

A. Right

B. Wrong

Answer：B

9. What marking is the white semicircle in the circle?

A. driving at reduced speed

B. ascertaining the vehicles speed

C. reducing the speed at the intersection

D. ascertaining the distance between the vehicles

Answer：D

10. Whats the meaning of this sign?

A. bypass from left side

B. continuous curves

C. sharp left curve

D. sharp right curve

Answer：C

11. How to run in this situation?

A. stop and yield to the opposite car

B. turn on the left-turn signal and run on the left side

C. turn on the head lights to let the other side yield

D. speed up to bypass the obstacle and then cross the other vehicle

Answer：A

12. In which situation cannot overtake a vehicle in front?

A. vehicle in front is reducing speed to yield

B. vehicle in front is turning left

C. vehicle in front is pulling over by the roadside

D. vehicle in front is turning right

Answer：B

13. Whats the meaning of the white horizontal solid line in the circle?

A. turning waiting line

B. deceleration line

C. yielding line

D. stop line

Answer：D

14. Whats the meaning of this sign?

A. no U turn at intersection

B. no changing lane from both sides

C. no left or right turn

D. no going straight

Answer：C

15. The seat belts can reduce the injury of the driver and passengers when there is a collision.

A. Right

B. Wrong

Answer：A

16. When driving during the period of probation, the driver should paste or hang _____ on the rear part of the vehicle

A. a mark of avoiding with care

B. a mark of paying attention of beginner

C. a uniform probation mark

D. a mark of paying attention of vehicle distance

Answer：C

17. The driving license will be revoked when the person is executed community drug treatment, forced isolation treatment or community-based rehabilitation measures.

A. Right

B. Wrong

Answer：A

18. Whats the meaning of this sign?

A. lanes for going in different directions

B. lane for both U turn and left turn

C. the lane of no left turn and no U turn

D. lane for both going straight and left turn

Answer：B

19. It is illegal for a driver to use a cell phone while driving.

A. Right

B. Wrong

Answer：A

20. Whats the meaning of this sign?

A. turn right

B. one-way road

C. going straight only

D. straight-going lane

Answer：A

21. The starter works when turning the ignition switch to the ACC position.

A. Right

B. Wrong

Answer：B

22. It lights to indicate that ______

A. left-turn signal flashes

B. front and rear width lights light on

C. front and rear width lights light on

D. right-turn signal flashes

Answer：A

23. What does this symbol indicate?

A. switch of high beam lights

B. switch of the low beam lights

C. master switch of vehicle lights

D. the switch of tail fog light

Answer：C

24. It lights to indicate that ______

A. the tail fog light is turned on

B. the low beam light is turned on

C. the high beam light is turned on

D. the head fog light is turned on

Answer：D

25. The continuously flashing yellow light is to warn that the driver should look and make sure it is safe to pass.

A. Right

B. Wrong

Answer：A