1. How to drive in this section?

A. occupy the road of the other side to pass the curve

B. drive along the middle of the curve

C. speed up and honk to pass

D. reduce speed and honk

Answer：D

2. How to cross each other on a narrow mountain road without the central dividing line?

A. The vehicle not close to the mountain goes first

B. The vehicle close to the mountain goes first

C. The empty vehicle goes first

D. The slow-moving vehicle goes first

Answer：A

3. It lights to indicate that ______

A. the tail fog light is turned on

B. the low beam light is turned on

C. the high beam light is turned on

D. the head fog light is turned on

Answer：D

4. Whats the meaning of the yellow broken and solid lines in the middle of the road?

A. no crossing the lines on the side of the broken line

B. no crossing the lines on the side of the solid line

C. allowed to cross the lines on the side of the solid line

D. allowed to cross the lines on both sides

Answer：B

5. When a vehicle passes a sharp curve, it may overtake if traffic is light.

A. Right

B. Wrong

Answer：B

6. Whats the meaning of this sign?

A. bypass from right side

B. one-way passing

C. watch for danger

D. bypass from left side

Answer：A

7. Driving a motorized vehicle on the road in violation of road traffic regulations shall be subject to relevant punishment.

A. Right

B. Wrong

Answer：A

8. You can make an U turn at this intersection.

A. Right

B. Wrong

Answer：B

9. When a vehicle enters a two-way tunnel, the driver should turn on ________.

A. The hazard lights

B. The high beam light

C. The fog light

D. The width light or the low beam light

Answer：D

10. What pedal is it?

A. accelerator pedal

B. clutch pedal

C. handbrake

D. the brake pedal

Answer：A

11. What kind of violation does this vehicle on road have?

A. not hang the license plate as required

B. deliberately cover the license plate

C. occupy the lane for non-motorized vehicles

D. run in the opposite direction

Answer：B

12. If an improper place is chosen for crossing another vehicle, the driver should immediately _______.

A. Reduce speed and cross each other slowly, or stop to yield

B. Occupy the left lane to force the opposite party to reduce speed and yield

C. Turn the head light to indicate the opposite party to stop and yield

D. Speed up and select a better place

Answer：A

13. It lights to remind that engine oil needs to be filled.

A. Right

B. Wrong

Answer：B

14. What is this manipulation device?

A. switch of reverse light

B. switch of wiper

C. switch of the hazard lights

D. combination switch of lights and signals

Answer：D

15. A motorized vehicle driver who drives after drinking is subject to a ________.

A. 3-point penalty

B. 2-point penalty

C. 6-point penalty

D. 12-point penalty

Answer：D

16. Whats the meaning of this yellow sign on the road?

A. no U turn

B. no left turn

C. no right turn

D. no going straight

Answer：C

17. Whats the meaning of this sign?

A. watch for two-way road

B. driving by either side of the road

C. watch for variable lane

D. variable lane

Answer：C

18. What does the traffic light mean?

A. no right turn

B. intersection warning

C. going straight is allowed

D. speed up and pass

Answer：B

19. Whats the meaning of this sign?

A. going straight and turning left

B. going straight and turning right

C. going straight and turning right at an interchange

D. going straight and turning left at an interchange

Answer：C

20. Whats the meaning of this sign?

A. expressway toll station

B. expressway checkpoint

C. toll station with ETC

D. expressway card-getting point

Answer：C

21. When driving a vehicle on the road, the driver should drive safely at the prescribed speed.

A. Right

B. Wrong

Answer：A

22. How to do when the vehicle breaks down on road and needs to stop to solve the problem?

A. stop in the middle of the road

B. stop the vehicle where will not interfere the traffic

C. turn on the low beam lights or fog lights

D. stop on the spot to solve the problem

Answer：B

23. A small bus driver should reduce speed rapidly when he suddenly feel bumpy on a flat expressway, to prevent tire blowout.

A. Right

B. Wrong

Answer：A

24. You can overtake from right side in this case.

A. Right

B. Wrong

Answer：B

25. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer：B