1. When a vehicle approaches a crosswalk, the driver should ________.

A. Speed up and pass

B. Stop immediately

C. Honk to indicate the pedestrians to yield

D. Observe the movement of pedestrians and non-motorized vehicles, make sure it is safe before passing

Answer：D

2. Whats the meaning of this sign?

A. expressway right side exit ahead

B. expressway next exit indication

C. expressway location and direction indication

D. expressway left side exit ahead

Answer：C

3. Before entering a level crossing, the vehicle should reduce speed and change to a lower gear, and _____ after entering the level crossing.

A. Cannot change gear

B. Can change gear

C. Can change to a higher gear

D. Stop and look

Answer：A

4. When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer：C

5. No turning right when encountering this traffic light at the intersection.

A. Right

B. Wrong

Answer：B

6. Driving this kind of vehicle on road is ____

A. rule-breaking act

B. violation of regulations

C. violation of law

D. criminal act

Answer：C

7. Whats the meaning of this sign?

A. turn right

B. one-way road

C. going straight only

D. straight-going lane

Answer：A

8. You may not use the turn signal when you change to the right lane.

A. Right

B. Wrong

Answer：B

9. A person whose driving license has been destroyed cannot drive a motorized vehicle.

A. Right

B. Wrong

Answer：A

10. Whats the meaning of the white horizontal solid line in the circle?

A. turning waiting line

B. deceleration line

C. yielding line

D. stop line

Answer：D

11. Whats the meaning of this sign?

A. Passing on both sides

B. Passing by the right side

C. Passing by the left side

D. Passing is prohibited

Answer：C

12. When the vehicle has changed its direction due to a front tire blowout on the road, the driver should firmly hold the steering wheel with both hands to ensure the vehicle goes straight.

A. Right

B. Wrong

Answer：A

13. Whats the meaning of this guide arrow?

A. going straight or U turn

B. going straight or left turn

C. going straight or changing to left lane

D. left turn or U turn

Answer：B

14. Whats the meaning of this sign?

A. reducing speed 40m ahead

B. minimum speed is 40km/hr

C. axle weight limit is 40 tons

D. maximum speed limit is 40km/hr

Answer：D

15. Whats the meaning of this guide arrow?

A. Y-shaped intersection ahead

B. separate road ahead

C. only left or right turn ahead

D. merging with both sides ahead

Answer：C

16. What is the max speed when passing a level crossing?

A. 15km/hr

B. 20km/hr

C. 30km/hr

D. 40km/hr

Answer：C

17. Whats the meaning of this guide arrow?

A. going straight and U turn are allowed ahead

B. left turn and U turn are allowed ahead

C. going straight and changing to left lane are allowed ahead

D. going straight and left turn are allowed ahead

Answer：B

18. Before the motorized vehicle runs on the road, the driver should check the safety and technical performance of the vehicle.

A. Right

B. Wrong

Answer：A

19. Which part does it control when pulling this switch?

A. turn signals

B. reverse light

C. contour light

D. hazard light

Answer：A

20. When driving in icy and snowy weather, the vehicle steadiness decreases and sudden acceleration can very easily cause spins and slides.

A. Right

B. Wrong

Answer：A

21. It lights when ABS is open.

A. Right

B. Wrong

Answer：B

22. A motorized vehicle driver is not allowed during the period of probation to pull a trailer.

A. Right

B. Wrong

Answer：A

23. Whats the meaning of the white solid line in the middle of the road?

A. unilateral same direction lanes dividing line that can be crossed

B. same direction lanes dividing line that can not be crossed

C. bilateral same direction lanes dividing line that can be crossed

D. opposite direction lanes dividing line that can not be crossed

Answer：B

24. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road exit

D. road exit marking

Answer：D

25. It lights to indicate that ______

A. the tail fog light is turned on

B. the low beam light is turned on

C. the high beam light is turned on

D. the head fog light is turned on

Answer：B