铜陵考驾照科目一有英文题吗

1. When a vehicle passes a level crossing, it is prohibited from overtaking.

A. Right

B. Wrong

Answer:A

2. When following a vehicle, the following vehicle may use the high beam light.

A. Right

B. Wrong

Answer:B

3. Whats the meaning of this sign?

A. stop and yield the right side vehicle while crossing each other

B. no passing on the right side road

C. two-way lane section ahead

D. stop and yield the opposite vehicle while crossing each other

Answer:D

4. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road exit

D. road exit marking

Answer:D

5. It lights if left door is not closed.

A. Right

B. Wrong

Answer:B

6. When a vehicle runs on an expressway, the driver may ascertain the speed according to his feeling.

A. Right

B. Wrong

Answer:B

7. It lights to indicate that ______

A. the tail fog light is turned on

B. the low beam light is turned on

C. the high beam light is turned on

D. the head fog light is turned on

Answer:D

8. When encountering stopping and waiting in turn or slow-moving vehicles in front, the motorized vehicle may _________.

A. borrow road to overtake

B. occupy the opposite lane

C. follow the vehicles in front

D. cut in the waiting vehicles

Answer:C

9. It displays the current engine speed is 6000 rev / min.

A. Right

B. Wrong

Answer:B

10. What kind of lane that the red car running in?

A. fast lane

B. slow lane

C. emergency lane

D. special lane

Answer:A

11. What does the traffic light mean?

A. allowed to pass

B. draw attention

C. intersection warning

D. prohibited from passing

Answer:D

12. Whats the meaning of this sign?

A. payment lane on the expressway

B. check lane on the expressway

C. card getting lane on the expressway

D. ETC lane on the expressway

Answer:D

13. How to use lights when overtaking at night?

A. turn off the high beam light

B. turn on high beam lights

C. use fog lights

D. using the high and low beam lights alternately

Answer:D

14. What marking is the white broken line on the road?

A. central line of opposite lanes which is prohibited from crossing

B. central line of opposite lanes which is restricted from crossing

C. central dividing line of the one-way road lanes

D. central line of same direction lanes which is allowed to cross

Answer:D

15. Which part does this switch control?

A. windscreen defogger

B. windscreen wiper

C. the hazard lights

D. devices of lights and signals

Answer:B

16. Whats the meaning of the yellow mark on the road?

A. no going straight

B. allowed to make a U turn

C. no U turn

D. no making a turn

Answer:C

17. When a vehicles turns, it should do so on the right side and refrain from occupying the lane of the other party. The left turn should be gentle and the right turn should be sharp.

A. Right

B. Wrong

Answer:A

18. Move the turn signal switch upward, the left-turn signal lights.

A. Right

B. Wrong

Answer:B

19. Whats the meaning of this sign?

A. no passing for small vehicle

B. passing for small vehicle only

C. passing for motorized vehicle

D. no passing for small vehicle

Answer:C

20. When a motorized vehicle makes a U turn, turns around or goes down a slope, the maximum speed should not exceed 40 kilometers per hour.

A. Right

B. Wrong

Answer:B

21. A motorized vehicle is not allowed to stop in the section 50 meters to the intersection.

A. Right

B. Wrong

Answer:A

22. When a vehicle runs on a narrow mountain road, the driver should ______ if the party close to the mountain mass refuses to yield.

A. Honk to urge the other party to yield

B. Maintain the normal speed

C. Reduce speed or stop to yield

D. Use the left lane and pass with care

Answer:C

23. In this case, if it has not begun going up the slope, the vehicle going uphill should yield to the one going downhill.

A. Right

B. Wrong

Answer:A

24. The three principles for careful driving are concentration, careful observation and early prevention.

A. Right

B. Wrong

Answer:A

25. How to do while entering this intersection?

A. shift the high and low beam lights alternately to remind the cars already in the intersection to yield

B. quickly cut in the cars already in the intersection

C. let the cars already in the intersection go first

D. honk and enter directly

Answer:C