1. Whats the meaning of this sign?

A. slippery section

B. sharp curve

C. test driving section

D. curve section

Answer：A

2. It lights when turning on the rear fog light.

A. Right

B. Wrong

Answer：B

3. When a vehicle is being overtaken by another vehicle, the driver should _____.

A. Run by the central line of the road

B. Speed up and yield

C. Continue to speed up and run

D. Reduce speed and run on the right side

Answer：D

4. When passing through an inundated road, the driver should ________.

A. Reduce speed and go slowly

B. Maintain the normal speed and pass

C. slide over in the neutral gear

D. Speed up and pass

Answer：A

5. The police can detain the vehicle if one drives a vehicle without ______

A. vehicle license

B. qualification certificate

C. ID card

D. pass paper

Answer：A

6. What is this manipulation device?

A. switch of the turn signal

B. switch of the head lights

C. switch of wiper

D. switch of defogger

Answer：D

7. How to do first when encountering such kind of bridge?

A. maintain the speed and pass

B. speed up and pass as soon as possible

C. stop and observe

D. pass slowly

Answer：C

8. If a motorized vehicle driver has caused a major accident in violation of the traffic regulations which has caused heavy loss to public or private property, the driver is subject to a prison term of less than 3 years or a criminal detention.

A. Right

B. Wrong

Answer：A

9. If the vehicle license of a motorized vehicle are lost, the vehicle owner should apply to the vehicle management station at the registration place for reissuing.

A. Right

B. Wrong

Answer：A

10. What marking is the white solid lines in the circle?

A. guide lanes lines

B. variable guide lanes lines

C. direction guide lines

D. one-way driving lines

Answer：A

11. When bicycles ahead obstruct the traffic flow, the driver may honk to remind them,speed up and bypass.

A. Right

B. Wrong

Answer：B

12. Whats the meaning of this sign?

A. going straight and turning left at an interchange

B. going straight and turning right at an interchange

C. going straight and turning left

D. going straight and turning right

Answer：A

13. What is the max speed when passing this curve?

A. 40km/hr

B. 30km/hr

C. 50km/hr

D. 70km/hr

Answer：B

14. Whats the meaning of this guide arrow on the road?

A. left curve or need to bypass from left side ahead

B. merge with the left flow due to obstacle ahead

C. right curve or need to merge with the right flow ahead

D. left curve or need to merge with the left flow ahead

Answer：C

15. If a motorized vehicle runs 50% faster than the specified speed limit, the driver is subject to a 3-point penalty.

A. Right

B. Wrong

Answer：B

16. When a vehicle goes uphill, the driver should observe the road conditions and the length of the slope in advance and shift to the lower gear in a timely manner to ensure the vehicle has sufficient power.

A. Right

B. Wrong

Answer：A

17. A driver who drives an illegally assembled motorized vehicle is subject to ______ .

A. being held for criminal liabilities according to law

B. a fine of 200 yuan ~ 2,000 yuan

C. being revoked the vehicle license

D. being detained for less than 15 days

Answer：B

18. Whats the meaning of this mark on the road?

A. minimum speed limit is 80km/hr

B. average speed is 80km/hr

C. maximum speed limit is 80km/hr

D. 80km/hr speed limit ban is lifted

Answer：A

19. The starter works when turning the ignition switch to the ACC position.

A. Right

B. Wrong

Answer：B

20. Whats the meaning of this sign?

A. location and distance

B. driving route

C. destination name

D. driving direction

Answer：A

21. This sign indicates construction section ahead and bypassing from left or right side.

A. Right

B. Wrong

Answer：B

22. Driving this motorized vehicle on road is not an illegal act.

A. Right

B. Wrong

Answer：B

23. If the driver finds there is no vehicle following, he can change lanes without turning on the turn signal.

A. Right

B. Wrong

Answer：B

24. Whats the meaning of this sign?

A. a manned level crossing

B. an unmanned level crossing

C. multi-crossing of railway and road

D. yielding the train with care

Answer：C

25. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer：B