1. What is this manipulation device?
A. the air throttle lever
B. the gear lever
C. the clutch lever
D. the handbrake
Answer：D
2. It displays that the current temperature of the coolant is 90 degrees.
A. Right
B. Wrong
Answer：A
3. What does this symbol indicate?
A. switch of high beam lights
B. switch of the low beam lights
C. master switch of vehicle lights
D. the switch of tail fog light
Answer：C
4. A person whose driving license has been destroyed cannot drive a motorized vehicle.
A. Right
B. Wrong
Answer：A
5. Whats the meaning of this sign?
A. bump road
B. low-lying road
C. high outburst road
D. hump bridge
Answer：B
6. After entering the acceleration lane of an expressway, the driver should increase the speed to more than _________ per hour.
A. 50
B. 60
C. 30
D. 40
Answer：B
7. This sign indicates jammed section ahead and passing slowly.
A. Right
B. Wrong
Answer：B
8. This sign reminds bump road ahead which may causes bump phenomenon.
A. Right
B. Wrong
Answer：A
9. If a motorized vehicle breaks down or causes a traffic accident on the expressway and cannot to run normally, the vehicle should be towed by ______.
A. a vehicle passing by
B. a large bus
C. a vehicle traveling together
D. a tow truck
Answer：D
10. When a vehicle enters a two-way tunnel, the driver should turn on ________.
A. The hazard lights
B. The high beam light
C. The fog light
D. The width light or the low beam light
Answer：D
11. How to do when encountering this situation of waiting in line?
A. cross the solid line from left side to overtake
B. overtake from both sides as will
C. wait in line
D. borrow the lane from right side to overtake
Answer：C
12. What is the max speed on this city road?
A. 40km/hr
B. 30km/hr
C. 50km/hr
D. 70km/hr
Answer：B
13. This sign reminds dangerous hillside road ahead.
A. Right
B. Wrong
Answer：B
14. What is this traffic sign?
A. slippery section
B. sharp curve
C. inverse curve
D. continuous curves
Answer：C
15. When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.
A. Right
B. Wrong
Answer：A
16. Whats the meaning of this sign?
A. max speed
B. speed limit
C. speed recommended
D. mini speed
Answer：C
17. The rear windshield defroster starts to work after pressing this switch.
A. Right
B. Wrong
Answer：B
18. Whats the meaning of this sign?
A. rest area
B. service area
C. car park
D. observation deck
Answer：A
19. Whats the meaning of this sign?
A. bypass at construction section
B. two-way traffic
C. bypass from left or right side
D. watch for danger
Answer：C
20. The method of this small passenger vehicle to leave the expressway lane is correct.
A. Right
B. Wrong
Answer：A
21. What is this instrument?
A. pressure meter
B. ammeter
C. water temperature meter
D. fuel meter
Answer：D
22. How to do in this intersection?
A. wait in the cross-hatched marking area
B. stop and wait outside the intersection
C. follow the vehicle in front and pass
D. wait inside the intersection
Answer：B
23. When encountering non-motorized vehicles intending to bypass a stopping vehicle, the driver should ________.
A. Honk to indicate them to yield
B. Yield to them
C. Speed up and bypass
D. Follow them closely and honk
Answer：B
24. The main impact of rainy weather on safe driving is _______.
A. The road is wet and slippery and the visibility is poor
B. The engine is prone to stop
C. The resistance to the vehicle increases
D. The electric equipment is prone to getting wet and causing short circuit
Answer：A
25. What is this instrument?
A. speed and mileage meter
B. engine tachometer
C. top speed meter
D. fuel consumption / 100 km
Answer：A
