凯里科目四英文答题软件

1. You can drive directly into the expressway from this position.

A. Right

B. Wrong

Answer:B

2. May not turn on the turn signal when overtaking.

A. Right

B. Wrong

Answer:B

3. It lights to indicate that ______

A. ABS system malfunction

B. handbrake is released

C. braking system malfunction

D. handbrake is pulled up

Answer:D

4. When the road maintenance vehicle and the engineering vehicle are on duty, the passing vehicles should avoid with care.

A. Right

B. Wrong

Answer:A

5. What marking is the triagle filled area in the circle?

A. stop line

B. deceleration line

C. guide line

D. cross-hatched marking

Answer:C

6. How to use lights at this position?

A. turn on the right-turn signal

B. turn on the left-turn signal

C. turn on the hazard lights

D. turn on the head lights

Answer:B

7. What kind of sign is it?

A. directional sign

B. indicative sign

C. prohibitive sign

D. warning sign

Answer:A

8. When a vehicle changes lane, the driver should turn on the turn signal and rapidly enter the new lane.

A. Right

B. Wrong

Answer:B

9. Whats the meaning of this sign?

A. customs inspection

B. stop-for-inspection

C. frontier inspection

D. no passing

Answer:B

10. Whats the meaning of this sign?

A. left-turn lane

B. straight-going lane

C. right-turn lane

D. lanes for going in different directions

Answer:D

11. Traffic lights are divided into red, green and yellow light.

A. Right

B. Wrong

Answer:A

12. Whats the meaning of this sign?

A. T-shaped intersection

B. branching intersection

C. reduce speed to pass

D. dead-end road

Answer:D

13. Whats the meaning of this sign?

A. bus station of expressway

B. rest area of expressway

C. gasoline station of expressway

D. service area of expressway

Answer:C

14. The starter works when turning the ignition switch to the ACC position.

A. Right

B. Wrong

Answer:B

15. What pedal is it?

A. clutch pedal

B. accelerator pedal

C. brake pedal

D. handbrake

Answer:C

16. Before a vehicle enters an intersection, the driver should reduce speed, observe and make sure it is safe to do so.

A. Right

B. Wrong

Answer:A

17. Whats the meaning of the diamond broken lines on the road?

A. road construction marking

B. vertical deceleration marking

C. horizontal deceleration marking

D. fewer lanes indication marking

Answer:B

18. When causing a road accident involving property damage, the parties to the accident may leave the scene if they have no dispute over the fact and cause.

A. Right

B. Wrong

Answer:A

19. Whats the meaning of this sign?

A. indication of the place name of the expressway ending

B. indication of the driving route of the expressway

C. indication of the driving direction of the expressway

D. indication of the location and distance of the expressway

Answer:D

20. What should the driver do when encountering a vehicle from the opposite direction on a road without a central line?

A. driving closely by the roadside

B. driving by the central of the road

C. reducing speed and driving by right side

D. run by using the lane for non-motorized vehicles

Answer:C

21. A front tire blowout is very dangerous. The vehicle will immediately turn to the side where the tire is blown out and have a direct impact on the drivers control of the steering wheel.

A. Right

B. Wrong

Answer:A

22. When a motorized vehicle runs on an expressway, it ________.

A. May stop on the road shoulder to let passengers on and off

B. May stop in the emergency lane to load and unload cargos

C. May overtake or stop in the acceleration or deceleration lane

D. Is not allowed to drive or stop in the emergency lane in a non-emergency case

Answer:D

23. It lights to indicate that the generator is charging to the batteries.

A. Right

B. Wrong

Answer:B

24. Driving a motorized vehicle on the expressway is not allowed to exceed the marked maximum speed.

A. Right

B. Wrong

Answer:A

25. When a vehicle goes uphill on a mountain road, it should change to a lower gear in a timely, accurate and rapid manner so as to avoid a situation in which driving at a high gear can reduce the power of the engine.

A. Right

B. Wrong

Answer:A