洛阳科目四考试英文版

1. The main impact of muddy roads on safe driving is _________.

A. The resistance to the vehicle becomes weaker

B. The tires can easily spin and skid

C. The visibility become lower and blurs the field of vision

D. The road grip becomes stronger

Answer:B

2. When the motor vehicle installed ABS system applys emergency braking, the driver can depress the brake pedal heavily.

A. Right

B. Wrong

Answer:A

3. If a front tire blowout has caused a turn in direction, the driver should not avoid excess adjustment. Instead, he should control the direction of the vehicle, ____, and slowly reduce the speed of the vehicle.

A. Apply emergency braking

B. Use the handbrake

C. Gently depress the brake pedal

D. Swiftly depress the brake pedal

Answer:C

4. What is this traffic sign?

A. Road narrows on both sides

B. Road narrows on the right side

C. Road narrows on the left side

D. Bridge narrows

Answer:A

5. When encountering non-motorized vehicles cutting in on the road, the driver should ___.

A. Honk to warn

B. Speed up and pass

C. Reduce speed and yield

D. Suddenly speed up when approaching

Answer:C

6. If a motorized vehicle causes a traffic accident on the expressway and cannot to run normally, the vehicle should be towed by a rescue vehicle or a tow truck.

A. Right

B. Wrong

Answer:A

7. A person who has falsified or altered the motorized vehicle driving license and if his act constitutes a crime, he should be held for criminal liabilities according to law.

A. Right

B. Wrong

Answer:A

8. Whats the meaning of this sign?

A. dangerous hillside road

B. cliff section

C. watch for dropping stone

D. dangerous section

Answer:C

9. A motorized vehicle is not allowed to stop in the section 50 meters to the narrow road less than 4 meters width.

A. Right

B. Wrong

Answer:A

10. May speed up to go through the crosswalk in this situation.

A. Right

B. Wrong

Answer:B

11. This sign warns the driver there is a crosswalk ahead.

A. Right

B. Wrong

Answer:B

12. Registration alternation is not needed when _____

A. change engine

B. add anti-collision device

C. change vehicles colour

D. change the chassis

Answer:B

13. Whats the meaning of this sign?

A. going straight and turning left

B. going straight and turning right

C. going straight and turning right at an interchange

D. going straight and turning left at an interchange

Answer:C

14. In such road sections, you can enter the cross-hatched marking area to wait.

A. Right

B. Wrong

Answer:B

15. When overtaking, the driver should ________ if the vehicle in front refuses to reduce speed or yield.

A. Follow closely and find chance to overtake again

B. Stop overtaking

C. Speed up and continue to overtake

D. Continuously honk and speed up to overtake

Answer:B

16. When ignition switch is in the START position, the starter starts.

A. Right

B. Wrong

Answer:A

17. When a vehicle passes a crosswalk, the driver should yield to the pedestrians.

A. Right

B. Wrong

Answer:A

18. An unregistered motorized vehicle should have _________ if it has to run on the road temporarily.

A. certificate of legal origin

B. license plate for temporary moving

C. borrowed license plate

D. certificate of legal unit

Answer:B

19. When driving in a foggy day, the driver should turn on ______.

A. The reverse light

B. The low beam light

C. The fog light

D. The high beam light

Answer:C

20. This sign warns obstacles ahead and reducing speed to bypass.

A. Right

B. Wrong

Answer:B

21. Using the low beam light in such circumstances.

A. Right

B. Wrong

Answer:A

22. Whats the meaning of this sign?

A. school area

B. watch for children

C. crosswalk

D. watch for pedestrians

Answer:B

23. May turn right in this situation.

A. Right

B. Wrong

Answer:B

24. When a vehicle passes a bumped road, the driver should ________.

A. Speed up and dash over under inertia

B. Change to the neutral gear and slide over

C. Maintain the original speed and pass

D. Pass slowly and steadily

Answer:D

25. Steering wheel will be locked if removing the key while the ignition switch is in the LOCK position.

A. Right

B. Wrong

Answer:A