1. When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer：C

2. A driver should observe the dynamic situation of the rear side vehicles before driving into the traffic flow from other road.

A. Right

B. Wrong

Answer：A

3. What does this sign mean?

A. Reminding continuous two or more up slopes ahead

B. Reminding the steep uphill road ahead

C. Reminding the steep downhill road ahead

D. Reminding continuous two or more down slopes ahead

Answer：D

4. When driving at night on a road with no or poor lighting, the driver should switch from the low beam light to the high beam light. But the vehicle following in the same direction is not allowed to use the high beam light.

A. Right

B. Wrong

Answer：A

5. When a vehicle enters a two-way tunnel, the driver should turn on ________.

A. The hazard lights

B. The high beam light

C. The fog light

D. The width light or the low beam light

Answer：D

6. Can leave the expressway into the ramp from this location directly.

A. Right

B. Wrong

Answer：B

7. In the course of reversing, the driver should move slowly, observe the conditions on both sides and in the rear and be ready to stop anytime.

A. Right

B. Wrong

Answer：A

8. Let the straight-going vehicle go first at this intersection.

A. Right

B. Wrong

Answer：A

9. This sign reminds an unmanned level crossing ahead.

A. Right

B. Wrong

Answer：B

10. What does the traffic light mean?

A. speed up and turn left

B. no right turn

C. intersection warning

D. speed and run straight

Answer：C

11. How to choose parking spot when needing to stop by the roadside?

A. stop in the opposite direction by the left roadside

B. stop in the parking area

C. stop anywhere as will by the roadside

D. stop in the sidewalk

Answer：B

12. Whats the meaning of the yellow slash filled area in the middle of the road?

A. one-way lanes dividing line

B. opposite direction lanes dividing line that can not be crossed

C. bilateral same direction lanes dividing line that can be crossed

D. opposite direction lanes dividing line that can be crossed

Answer：B

13. Which kind of vehicles are allowed to run in the lane with this marking on road?

A. public transport vehicles

B. private vehicles

C. taxis

D. official vehicles

Answer：A

14. Which part does this switch control?

A. windscreen defogger

B. windscreen wiper

C. the hazard lights

D. devices of lights and signals

Answer：B

15. Whats the role of indicative sign?

A. tell the direction information

B. warn danger ahead

C. restrict the vehicles and pedestrians from passing

D. indicate the vehicles and pedestrians to go ahead

Answer：D

16. What marking is the road mark?

A. crosswalk ahead

B. intersection ahead

C. reduce speed and yield ahead

D. stop to yield ahead

Answer：A

17. When the fire engine, ambulance and wrecker are executing an emergency task, other vehicles should yield.

A. Right

B. Wrong

Answer：A

18. Whats the meaning of this sign?

A. no going straight and no changing to left lane

B. no going straight and no left turn

C. allowed to go straight and turn left

D. no going straight and no right turn

Answer：B

19. When crossing each other on a narrow road, the driver should slow down, yield and stop first.

A. Right

B. Wrong

Answer：A

20. The full mark of Driving Skills, Common Knowledge on Safe and Courteous Driving of the subject 3 test is 100, each of the passing mark is 80 and 90.

A. Right

B. Wrong

Answer：B

21. Driving across the double solid lines is _______

A. rule-breaking act

B. violation of law

C. faulty act

D. violation of regulations

Answer：B

22. The traffic lights allow the vehicle to ______

A. turn right

B. stop and wait

C. turn left

D. go straight

Answer：A

23. This sign reminds serious bump road ahead.

A. Right

B. Wrong

Answer：B

24. After starting the engine, it lights to indicate that ______

A. fuel pump abnormal or malfunction

B. ignition system malfunction

C. fuel supply system is abnormal

D. fuel in tank reaches the minimum level

Answer：D

25. It lights to indicate that ______

A. front and rear width lights light on

B. front and rear width lights light on

C. left-turn signal flashes

D. right-turn signal flashes

Answer：D