1. When driving at night on a road that has good lighting, the driver should use _______.

A. The fog light

B. The low beam light

C. The high beam light

D. The hazard lights

Answer：B

2. What is this instrument?

A. engine tachometer

B. driving speed meter

C. interval mileage meter

D. fuel consumption / 100 km

Answer：A

3. Rear fog light lights when the light switch is at this position.

A. Right

B. Wrong

Answer：A

4. Whats the meaning of the white markings on the road?

A. road construction marking

B. horizontal deceleration marking

C. vertical deceleration marking

D. fewer lanes indication marking

Answer：B

5. What device does the switch of this symbol control?

A. the windscreen wiper and washer

B. the rear window defrosting or defogging

C. the rear window wiper and washer

D. the windscreen defrosting or defogging

Answer：C

6. How to do while entering this intersection?

A. shift the high and low beam lights alternately to remind the cars already in the intersection to yield

B. quickly cut in the cars already in the intersection

C. let the cars already in the intersection go first

D. honk and enter directly

Answer：C

7. Must reduce the frequency of honking in this section.

A. Right

B. Wrong

Answer：B

8. The vehicles should run by the right shoulder of an expressway.

A. Right

B. Wrong

Answer：B

9. Which is correct to use lights on rainy day when following a vehicle?

A. use high beam lights

B. cannot use the low beam lights

C. cannot use the high beam light

D. use fog lights

Answer：C

10. Whats the meaning of this guide arrow on the road?

A. left curve or need to bypass from left side ahead

B. merge with the left flow due to obstacle ahead

C. right curve or need to merge with the right flow ahead

D. left curve or need to merge with the left flow ahead

Answer：C

11. What is this instrument?

A. speed and mileage meter

B. engine tachometer

C. top speed meter

D. fuel consumption / 100 km

Answer：A

12. Before entering a level crossing, the vehicle should reduce speed and change to a lower gear, and _____ after entering the level crossing.

A. Cannot change gear

B. Can change gear

C. Can change to a higher gear

D. Stop and look

Answer：A

13. The double yellow solid lines in the middle of the road are used to separate the traffic flow in opposite directions, crossing the lines to overtake or make a turn is allowed if it is safe.

A. Right

B. Wrong

Answer：B

14. When a vehicle passes a level crossing, the driver should use the low gear to pass and should not change gear halfway in order to avoid engine kill.

A. Right

B. Wrong

Answer：A

15. When braking on a muddy road, the tires can easily spin or drift and cause traffic accidents.

A. Right

B. Wrong

Answer：A

16. What does this symbol indicate?

A. luggage compartment is opened

B. door of one side is opened

C. engine compartment is opened

D. cover of fuel tank is opened

Answer：A

17. Whats the meaning of this sign?

A. payment lane on the expressway

B. check lane on the expressway

C. card getting lane on the expressway

D. ETC lane on the expressway

Answer：D

18. Whats the role of the indicative marking?

A. No passing

B. indicate vehicles to pass

C. restrict from passing

D. warn and remind

Answer：B

19. Stop and yield to the pedestrians under this situation.

A. Right

B. Wrong

Answer：A

20. The vehicle with ABS system can minimize the braking distance when driving on a road covered by ice and snow.

A. Right

B. Wrong

Answer：B

21. ABS system can maximize the braking efficiency when conducting _______

A. braking intermittently

B. braking continuously

C. applying emergency braking

D. gently depressing the brake pedal

Answer：C

22. The driving license of 10-year validity will be issued if the penalty points never reached 12 points in every scoring cycle during the 6-year validity of the license.

A. Right

B. Wrong

Answer：A

23. No turning right when encountering this traffic light at the intersection.

A. Right

B. Wrong

Answer：B

24. Whats the meaning of this sign?

A. stop and yield the right side vehicle while crossing each other

B. no passing on the right side road

C. two-way lane section ahead

D. stop and yield the opposite vehicle while crossing each other

Answer：D

25. When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.

A. Right

B. Wrong

Answer：A