1. Driving across the double solid lines is _______

A. rule-breaking act

B. violation of law

C. faulty act

D. violation of regulations

Answer：B

2. When a motorized vehicle goes at night through an intersection that has no traffic lights, the driver should not use the high and low beam lights alternately.

A. Right

B. Wrong

Answer：B

3. The yellow lane-dividing line in the picture is used to separate the traffic flow in opposite directions, crossing the line to overtake or make a turn is allowed if it is safe.

A. Right

B. Wrong

Answer：A

4. Whats the meaning of this sign?

A. crosswalk lights

B. watch for pedestrians

C. attention to traffic lights

D. intersection

Answer：C

5. Whats the meaning of this sign?

A. observation deck

B. car park

C. rest area

D. parking space

Answer：A

6. When the green arrow for a lane is on and there are still pedestrians in the crosswalk before the vehicle, the driver should ___________.

A. Directly start up and pass

B. Start up and bypass the pedestrians from behind

C. Start up and bypass before the pedestrians

D. Start up after the pedestrians have passed

Answer：D

7. After starting the engine, it lights to indicate that ______

A. engine main oil way blockage

B. engine oil pressure is too low

C. engine crankshaft box leaks

D. engine oil pressure is too high

Answer：B

8. It lights to indicate that ______

A. front and rear width lights light on

B. front and rear width lights light on

C. left-turn signal flashes

D. right-turn signal flashes

Answer：D

9. What does this symbol indicate?

A. switch of high beam lights

B. switch of the low beam lights

C. master switch of vehicle lights

D. the switch of tail fog light

Answer：C

10. Which is correct to use lights on rainy day when following a vehicle?

A. use high beam lights

B. cannot use the low beam lights

C. cannot use the high beam light

D. use fog lights

Answer：C

11. Whats the meaning of this sign?

A. no yielding

B. yield while crossing each other

C. reduce speed and yield

D. stop to yield

Answer：C

12. It lights to indicate that ______

A. the side fans work

B. air external circulation

C. the front fan works

D. air internal circulation

Answer：C

13. Whats the meaning of this sign?

A. T-shaped intersection ahead

B. road branching point ahead

C. Y-shaped intersection ahead

D. intersection ahead

Answer：A

14. Whats the meaning of these white rectangle markings?

A. long time parking

B. time limited parking

C. free parking

D. special parking

Answer：B

15. This set of the hand signals of the traffic police indicates that the vehicles should ____ .

A. reduce speed and pass slowly

B. pull over

C. stop

D. turn right

Answer：D

16. Whats the meaning of this sign?

A. no U turn

B. no changing to left lane

C. no turning left

D. no entering the left lane

Answer：C

17. Whats the meaning of this sign?

A. lane direction indication

B. intersection ahead

C. lane information indication

D. road branching point ahead

Answer：B

18. Whats the meaning of this sign?

A. no changing lane

B. no left turn

C. no going straight

D. no U turn

Answer：D

19. Whats the meaning of this yellow sign on the road?

A. no U turn

B. no left turn

C. no right turn

D. no going straight

Answer：C

20. When a vehicle merges with the traffic flow, the driver should turn on the turn signal in advance, go straight, observe the traffic conditions on both sides through the rear-view mirror, and merge with the traffic flow if it is safe to do so.

A. Right

B. Wrong

Answer：A

21. When the green light at a congested intersection is on, the vehicles _______.

A. May directly enter the intersection

B. Cannot enter the intersection

C. May pass the intersection by borrowing the opposite lane

D. Enter the intersection if it is safe to do so

Answer：B

22. Whats the meaning of this sign?

A. downhill section on right side

B. driving by the right side of the road

C. stopping by the right side of the road

D. right turn only

Answer：B

23. If a vehicle has the right of way at an intersection but encounters a vehicle cutting in, the driver should _________.

A. Rush to pass

B. Speed up in advance and pass

C. Reduce speed and evade, or stop to yield when necessary

D. Go forward at the normal speed according to the right of way and refuses to evade

Answer：C

24. ABS system can maximize the braking efficiency when conducting _______

A. braking intermittently

B. braking continuously

C. applying emergency braking

D. gently depressing the brake pedal

Answer：C

25. The light switch is in this position, front fog lights turn on

A. Right

B. Wrong

Answer：A