淄博英文版科目一考试题库

1. When a vehicle merges with the traffic flow, the driver should turn on the turn signal in advance, go straight, observe the traffic conditions on both sides through the rear-view mirror, and merge with the traffic flow if it is safe to do so.

A. Right

B. Wrong

Answer:A

2. What kind of device the safety bags are?

A. ABS system

B. electronic brake force distribution system

C. assisted occupants protection system

D. drivers head and neck protection system

Answer:C

3. It lights to indicate that ______

A. the head fog light is turned on

B. the low beam light is turned on

C. the high beam light is turned on

D. the tail fog light is turned on

Answer:C

4. No turning right at the intersection ahead.

A. Right

B. Wrong

Answer:B

5. Which part of the driver can be protected by the safety pillow when there is a rear-end collision?

A. waist

B. chest

C. head

D. neck

Answer:D

6. Whats the meaning of this sign?

A. continuous down slopes

B. steep downhill road

C. steep uphill road

D. continuous up slopes

Answer:A

7. Whats the meaning of this sign?

A. watch for pedestrians

B. watch for children

C. school area

D. crosswalk

Answer:A

8. When a tire blows out suddenly on the road, the driver should refrain from violently depressing the brake pedal in panic. Instead, he should try his best to shift the gear to a low position and use the engine braking to reduce the speed of the vehicle.

A. Right

B. Wrong

Answer:A

9. Whats the meaning of this sign?

A. steep downhill road

B. continuous up slopes

C. steep uphill road

D. embankment road

Answer:C

10. Whats the meaning of this sign?

A. no U turn

B. no changing to left lane

C. no turning left

D. no entering the left lane

Answer:C

11. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road entry

D. road exit marking

Answer:A

12. When running on the road having maximum speed limit signs, the motorized vehicle is not allowed to exceed the marked maximum speed.

A. Right

B. Wrong

Answer:A

13. It lights to indicate that the handbrake may not loose in the end.

A. Right

B. Wrong

Answer:B

14. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer:B

15. Whats the meaning of this sign?

A. reduce speed in tunnel

B. turn on the high beam lights in tunnel

C. turn on the light in tunnel

D. width light in tunnel

Answer:C

16. You can not drive a motorized vehicle into the lane where the red X-shaped light or the red arrow light is on.

A. Right

B. Wrong

Answer:A

17. It displays the current engine speed is 6000 rev / min.

A. Right

B. Wrong

Answer:B

18. When the traffic conditions at an intersection are complicated, the driver should be patiently waiting instead of taking chance.

A. Right

B. Wrong

Answer:A

19. As the traffic flow at an interchange is generally one-way, the vehicles do not have to reduce speed when passing.

A. Right

B. Wrong

Answer:B

20. When a vehicle goes downhill on a mountain road, it is not allowed to overtake.

A. Right

B. Wrong

Answer:A

21. Which kind of sign is it?

A. warning sign

B. prohibitive sign

C. indicative sign

D. directional sign

Answer:B

22. Whats the meaning of this sign?

A. turn right

B. one-way road

C. going straight only

D. straight-going lane

Answer:A

23. In such road sections, you can enter the cross-hatched marking area to wait.

A. Right

B. Wrong

Answer:B

24. This sign warns slippery road ahead and running slowly with care.

A. Right

B. Wrong

Answer:B

25. It lights to indicate that ______

A. handbrake released

B. foot brake failure

C. braking system is abnormal

D. the brake pedal does not return back

Answer:C