1. When driving in thick or extremely thick fog, the driver should ____ due to low visibility.

A. Turn on the head light and keep driving

B. Turn on the contour light, fog light and drive along the right side

C. Turn on the hazard lights and keep driving

D. Turn on the hazard lights, fog light, and stop at a safe place

Answer：D

2. What is the Minimum speed in this lane?

A. 100km/hr

B. 110km/hr

C. 60km/hr

D. 90km/hr

Answer：D

3. The main impact of the road conditions at night on safe driving is ________.

A. The visibility is low and unfavorable for observing road traffic conditions

B. The road surface is complex and changing

C. The physical strength of the driver decreases

D. The driver can easily have impulse and illusion

Answer：A

4. Whats the meaning of this sign?

A. hump bridge

B. high outburst road

C. low-lying road

D. bump road

Answer：A

5. This sign reminds the road in front changes to inseparate two ways section.

A. Right

B. Wrong

Answer：A

6. ABS system can keep the steering capability of the front wheels while providing maximum braking force when the vehicle conduct an emergency braking.

A. Right

B. Wrong

Answer：A

7. What marking are the white broken lines in the circles?

A. small vehicles turning lines

B. lane connection lines

C. non-motorized vehicles guide lines

D. intersection guide line

Answer：D

8. At this position, you may speed up to pass through the section.

A. Right

B. Wrong

Answer：B

9. A motorized vehicle driver who drives the vehicle which permission is different is subject to a ________.

A. 2-point penalty

B. 3-point penalty

C. 6-point penalty

D. 12-point penalty

Answer：D

10. The seat belts can reduce the injury of the driver and passengers when there is a collision.

A. Right

B. Wrong

Answer：A

11. When a vehicle changes lane, the driver should turn on the turn signal in advance,observe traffic conditions, maintain a safe distance and move into the new lane.

A. Right

B. Wrong

Answer：A

12. What marking is the road mark?

A. crosswalk ahead

B. intersection ahead

C. reduce speed and yield ahead

D. stop to yield ahead

Answer：A

13. How to use lights when overtaking at night?

A. turn off the high beam light

B. turn on high beam lights

C. use fog lights

D. using the high and low beam lights alternately

Answer：D

14. When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.

A. Right

B. Wrong

Answer：A

15. It lights to indicate that ______

A. the tail fog light is turned on

B. the low beam light is turned on

C. the high beam light is turned on

D. the head fog light is turned on

Answer：A

16. As the traffic flow at an interchange is generally one-way, the vehicles do not have to reduce speed when passing.

A. Right

B. Wrong

Answer：B

17. Whats the meaning of this sign?

A. bypass at construction section

B. two-way traffic

C. bypass from left or right side

D. watch for danger

Answer：C

18. When driving at night on a road with no or poor lighting, the driver should switch from the low beam light to the high beam light. But the vehicle following in the same direction is not allowed to use the high beam light.

A. Right

B. Wrong

Answer：A

19. How far away should the warning sign be placed in the coming direction when this vehicle breaks down and stops temporarily on the expressway?

A. beyond 150m

B. 50~150m

C. within 50m

D. 50~100m

Answer：A

20. When entering an expressway toll gate, the driver should select a gate where _______.

A. There are more vehicles

B. The red light is on

C. The green light is on

D. Service is temporarily suspended

Answer：C

21. Whats the meaning of these white rectangle markings?

A. long time parking

B. time limited parking

C. free parking

D. special parking

Answer：B

22. Which lane to choose when turning left in this intersection?

A. the far left lane

B. middle lane

C. not need to change lane

D. the far right lane

Answer：A

23. Whats the meaning of this sign?

A. provincial highway No.

B. county road No.

C. township road No.

D. national highway No.

Answer：C

24. It lights while driving to indicate that ______

A. engine temperature is too high

B. engine cooling system malfunction

C. engine lubrication system malfunction

D. engine temperature is too low

Answer：A

25. How to do when the vehicle breaks down on road and needs to stop to solve the problem?

A. stop in the middle of the road

B. stop the vehicle where will not interfere the traffic

C. turn on the low beam lights or fog lights

D. stop on the spot to solve the problem

Answer：B